The EVOlution of the downhill:
Pushing your bike as hard as you do in the daytime requires some intense design requirements. A wide field of view, ability to see downrange and recognize objects quickly, and more importantly, an unbroken wall of light to keep your mind sharp and focused.
The Evo Downhill Package does just this, by pairing the extremely wide and powerful Trail Evo on the handlebars, and the lightweight and punchy Hangover on the helmet to give you an unwavering wall of light, even in the tightest of switchbacks. It's a lighting package that needs to be seen to believe!
Optically Engineered
- 4.85 average across 7,179 verified reviews
- 30-day Love It or Return It, shipping on us
- 3-year warranty plus lifetime Don't Be A Dick coverage
Advanced Optical Engineering
We meticulously tune our beam patterns in-house with LucidShape software over hundreds of hours to create a custom optic design for every light we make. These aren’t off-the-shelf flashlight reflectors with simple round spot beams.
All the designing, simulating, prototyping, and trail testing is to ensure you get the most out of every lumen produced by aiming them exactly where they need to go on the trail.
With the Evo DH Package, we balanced the output and beams to complement each other perfectly. Evo on the bars gives a super-wide, evenly lit coverage, giving the trail depth and doing the heavy lifting. While the Hangover fires far down the trail to spot your landing and through corners, all with outstanding peripheral coverage so you don’t miss a thing at speed.
Rock Solid Mounting
A good light isn’t so good if it’s bouncing up and down on all the time. That’s why we made a bolt-on clamp mount for Evo. It’s solidly locked to the bar and the beam won’t shake around like lights with rubber strap mounts do.
It's an easy one-handed quick-release process to pop Trail Evo off post-ride to charge.
Hangover uses the tried-and-tested action camera mount to securely mount to your helmet just like cameras have for years.
Refreshingly Simple
Few people read instruction manuals, even fewer want to, so we keep our lights dead simple so that you don’t need an advanced degree to remember a complicated sequence of button presses get to the mode you want.
Thermally Engineered
High power bike lights get hot, that is why we use our engineering prowess to keep them cool. Utilizing another industry first, we collect air through a scoop underneath the light, and pass it through the light, cooling all nine LED's on Trail Evo that are spread apart to balance the heat load.
USB-C pass-thru charging
We were one of the first to offer USB-C charging as standard, except we took it a step further by offering pass-through charging as well. This lets you plug in any USB power bank and charge the light while in use, in any mode, for ANY light. Game changer for 24 hour races and extra long night rides!
Specifications
| Trail Evo | Hangover | |
|---|---|---|
| Lumens | ~ 2200 lumens | ~ 1000 lumens |
| Battery | 10,000mAH capacity / 2x LG 21700 M50LT cells | LG MJ1 18650 3500 mAH capacity |
| Weight | 275g Trail Evo Lighthead | 105g Hangover Lighthead |
| 36g Quick Release Mount | 20g Action Camera Mount | |
| Modes | Adaptive - High - Medium - Low | Adaptive - High - Medium - Low |
| Daytime Flash/Nighttime Flash | Daytime Flash/Nighttime Flash | |
| Materials | Magnesium lower shell | Thermally Conductive Nylon (CoolPoly) lower shell |
| Glass Fiber Reinforced Nylon Mount | ABS Action Camera Mount | |
| High Strength polycarbonate substrate | High Strength polycarbonate substrate | |
| Soft touch TPU overmold | Soft touch TPU overmold | |
| High clarity PMMA lens | High clarity PMMA lens | |
| Electrical Features | Thermal protection circuit | Thermal protection circuit |
| Constant current step-down converter | Constant current step-down converter | |
| Battery management system | Battery management system | |
| QC3.0 USB-C charging | QC3.0 USB-C charging | |
| Pass-through charging | Pass-through charging | |
| Low Battery warning | Low Battery warning | |
| 20 minute "get-home" buffer in every mode | 20 minute "get-home" buffer in every mode | |
| What's in the box | Trail Evo Lighthead | Hangover Lighthead |
| Quick Release Bar Mount for 35mm bars | Curved Helmet Mount Base | |
| 31.8mm shim (25.4mm and 22.2mm available) | (Wide mount and notched mount available) | |
| M2.5 Allen Key | 3M adhesive pad | |
| USB-C to USB-A charging cable (USB-C to USB-C available) | USB-C to USB-A charging cable | |
| Instruction Manual (Download HERE) | Instruction Manual (Download HERE) |
Frequently asked questions
Which light goes where? Is this any different from buying both?
Evo on the bar, Hangover on the helmet. Evo throws the wide, even floor that gives the trail depth; Hangover points down the trail and into corners wherever you look. Neither converts to the other job well. The package is exactly the two lights you'd buy separately, shipped together in one box.
I have an integrated bar/stem. Can I mount Evo?
Usually. If your bar has an accessory fitting on the front or underside (Trek RSL Blendr, Roval Control, newer Scott Syncros IC), put a GoPro-style adapter there and use our Action Camera QR Mount. If it has no fittings at all, there's no clean answer yet, so email us a photo and we'll tell you straight. Round bars: 35 mm and 31.8 mm out of the box, 25.4 and 22.2 shims on the accessories page.
Will Hangover fit my helmet?
It's a standard GoPro interface, so any action-camera mount works. The curved adhesive base in the box fits most helmets. Flat centre panels or vent gaps (POC, Trek WaveCel, Smith Forefront) want the Wide base; a centre ridge (TLD A2, Leatt) wants the Notched base. Don't want tape on your lid? GoPro's Vented Helmet Strap Mount works great. Not sure? Email us a photo of the top of your helmet.
What are the lumens?
Trail Evo: 2200 high, 880 medium, 440 low. Hangover: 1000 high, 400 medium, 200 low. We don't headline the numbers because they say nothing about where the light goes, and the two beams are shaped to overlap, not to fight each other.
How long do they run?
Evo: adaptive 2.6 h, high 1.7, medium 4.2, low 8.5. Hangover: adaptive 1.6 h, high 1.1, medium 2.9, low 6.5. All bench-measured from full to the low-battery warning at riding-speed airflow. Both give you about 20 minutes of get-home light after the warning.
Can I extend runtime with a power bank or my eBike?
Both lights pass-through charge in every mode. Plug in from the start of the ride, not when the light is dying. A QC 3.0 bank keeps up with Evo on medium for 12+ hours on a 20 Ah pack. An eBike display USB port works too, but most are low power, so they slow the drain rather than run the light. No direct wiring to the eBike battery; a dedicated wired eBike light is in the works.
What charger do I need? How long to charge?
Any USB charger on earth, including your phone brick and European plugs. On a QC 3.0 charger Evo goes 0 to 80% in about 3 hours and Hangover in about 1 hour, then both trickle the rest. C-to-C cables work at the same speed; an A-to-C cable comes with each light.
Are they waterproof? How do they do in the cold?
Both are sealed for rain, snow, creek crossings and a hose-down after the ride. No pressure washer, no scuba, and if you somehow drown one it's covered. Cold cuts runtime like any lithium cell; the LEDs' waste heat helps keep the packs warm on higher modes, and riders in Alaska use these at -30 C. Keep them indoors between rides.
Can the batteries be replaced?
By us, free, for the life of the lights. Not by you in the field. Almost every replacement we do is from a light stored dead in a cold garage all summer, not from riding, so charge them up and keep them indoors and you'll likely never need one.
What's the warranty?
Three years, plus lifetime support from a real person in our shop. Crashed it, dog chewed the cable, lost the mount screw, ran it over: covered. Two rules. Be kind to the people helping you, and be honest about what happened so we can engineer the failure out. Details on the warranty page.
All questions
Which light goes where? Is this any different from buying both?
Evo on the bar, Hangover on the helmet. Evo throws the wide, even floor that gives the trail depth; Hangover points down the trail and into corners wherever you look. Neither converts to the other job well. The package is exactly the two lights you'd buy separately, shipped together in one box.
I have an integrated bar/stem. Can I mount Evo?
Usually. If your bar has an accessory fitting on the front or underside (Trek RSL Blendr, Roval Control, newer Scott Syncros IC), put a GoPro-style adapter there and use our Action Camera QR Mount. If it has no fittings at all, there's no clean answer yet, so email us a photo and we'll tell you straight. Round bars: 35 mm and 31.8 mm out of the box, 25.4 and 22.2 shims on the accessories page.
Will Hangover fit my helmet?
It's a standard GoPro interface, so any action-camera mount works. The curved adhesive base in the box fits most helmets. Flat centre panels or vent gaps (POC, Trek WaveCel, Smith Forefront) want the Wide base; a centre ridge (TLD A2, Leatt) wants the Notched base. Don't want tape on your lid? GoPro's Vented Helmet Strap Mount works great. Not sure? Email us a photo of the top of your helmet.
What are the lumens?
Trail Evo: 2200 high, 880 medium, 440 low. Hangover: 1000 high, 400 medium, 200 low. We don't headline the numbers because they say nothing about where the light goes, and the two beams are shaped to overlap, not to fight each other.
How long do they run?
Evo: adaptive 2.6 h, high 1.7, medium 4.2, low 8.5. Hangover: adaptive 1.6 h, high 1.1, medium 2.9, low 6.5. All bench-measured from full to the low-battery warning at riding-speed airflow. Both give you about 20 minutes of get-home light after the warning.
Can I extend runtime with a power bank or my eBike?
Both lights pass-through charge in every mode. Plug in from the start of the ride, not when the light is dying. A QC 3.0 bank keeps up with Evo on medium for 12+ hours on a 20 Ah pack. An eBike display USB port works too, but most are low power, so they slow the drain rather than run the light. No direct wiring to the eBike battery; a dedicated wired eBike light is in the works.
What charger do I need? How long to charge?
Any USB charger on earth, including your phone brick and European plugs. On a QC 3.0 charger Evo goes 0 to 80% in about 3 hours and Hangover in about 1 hour, then both trickle the rest. C-to-C cables work at the same speed; an A-to-C cable comes with each light.
Are they waterproof? How do they do in the cold?
Both are sealed for rain, snow, creek crossings and a hose-down after the ride. No pressure washer, no scuba, and if you somehow drown one it's covered. Cold cuts runtime like any lithium cell; the LEDs' waste heat helps keep the packs warm on higher modes, and riders in Alaska use these at -30 C. Keep them indoors between rides.
Can the batteries be replaced?
By us, free, for the life of the lights. Not by you in the field. Almost every replacement we do is from a light stored dead in a cold garage all summer, not from riding, so charge them up and keep them indoors and you'll likely never need one.
What's the warranty?
Three years, plus lifetime support from a real person in our shop. Crashed it, dog chewed the cable, lost the mount screw, ran it over: covered. Two rules. Be kind to the people helping you, and be honest about what happened so we can engineer the failure out. Details on the warranty page.
Question not answered? Shoot us an email.
Contact us












